Quick Answer: Do You Fit Roman Blinds Inside Or Outside Window?

Should blinds be wider than window?

Because you’re mounting the blinds outside the window on the wall above, they need to be slightly wider and taller than the opening.

We recommend going at least 2″ wider than the opening on either side, so 4″ total..

Should blinds be flush with window?

1. Measuring window frame for accurate blinds fitting. … 1) Mounting flush with the wall gives a cleaner look, as it hides the depth of the window sill itself and gives a smooth surface against your wall. We recommend this in most cases if you are mostly concerned with aesthetics.

Can you inside mount blinds on double hung windows?

As long as your window frame has enough depth to mount blinds inside the opening, we almost always recommend an inside mount. … For double hung windows, be sure that you measure from the farthest protruding pane to the edge of the trim.

Do blinds have to fit exactly?

Shades and blinds must fit precisely to a window’s measurements only if they are installed inside the window frame or opening. This is called an inside mount.

Should roller blinds face in or out?

Because the fabric sits closer to the window, front rolling is best for light and heat control. When inside mounting to a recess, it could get in the way of obstructions such as handles, keys and locks. In this case, you will need to consider front rolling your blind.

Where do blinds go on the window?

Outside-mounted blinds or shades are mounted on the wall outside the window frame, on the window trim or even on the ceiling above the window. Outside mounted window coverings may be right for your home if: You want to block more light. Outside mounts cover the entire window.

Can you put a roller blind on the outside of the window?

Fitting a roller blind outside of a window recess typically causes no issue in terms of lost space. However, in order to cover the entirety of the frame, the blind itself will need to be larger in size than that of its inside-recess counterpart.

Can you fit Roman blinds to UPVC windows?

Fitting your blind to a UPVC window frame can be a daunting task, but don’t worry, it’s actually relatively simple. … Include a drill along with a 3mm drill bit, a tape measure, a spirit level, and a pencil or pen to mark on the UPVC. All the screws and brackets will be included with your blinds.

Where do you hang blinds in deep windows?

You can either mount your blinds inside or outside of the casing. Hanging the blinds outside means your window look bigger but when you hang your blinds inside, your window looks slimmer. When you need to mount your blinds outside, measure along the outside edges of the casing that surrounds the window.

How deep does a window need to be for inside mount blinds?

3⁄4″3⁄4″ is the minimum depth required for inside mount blinds.

How much space do you need between blinds and windows?

To minimize light leakage and ensure privacy the blind should overlap the window opening by 4″ on each side for a total of 8″ on entire width. 2) Measure distance from where the top of the blind will be located to the window sill. The blind should overlap the window opening on the top and the bottom by at least 3″.

Which is better inside or outside mount blinds?

If you’re installing blackout window treatments to block unwanted light, then you should use outside mount blinds. Mounting blinds outside the window frame will give you more light coverage than blinds that hang from the inside.

How do Roman blinds fit to window?

Basically, hanging the Roman blinds via an interior mount means attaching the shades to the “ceiling” portion of the window frame. In contrast, an exterior mount means attaching the shades to the “walls” of the window frame, which can either on the left or side window.

Should blinds touch window sill?

In most cases blinds look and work the best when they rest on the window sill. No one is ever going to notice extra 1/2″ of length and this keeps them from blowing in a slight breeze. If you prefer for the blinds not to touch the windowsill, you should deduct 1/4″.